Home / Printed sensors / MultiMoS
MultiMoS wireless sensors
A printed foil with up to 26 sensing points, a small electronics module and Bluetooth. It measures pressure and temperature at the same time, streams up to 150 frames per second and fits into gaps where a conventional sensor will not go.
- Points in contact
- 0 of 26
- Reading
- 0 %
- Contact centre
- no contact
Each square stands for one sensing point. Pressure and temperature are read on the same foil, so both channels share one position. Schematic model, not measured data.
One foil, two readings per point
Pressure and temperature come as standard. Humidity, VOC and gas sensing can be added to the same print when the application needs it.
- 16-bit resolution65,536 steps per reading, with no crosstalk between points.
- Standard shapesRectangle, stripe, slider and circle, or a free-form layout printed to your drawing.
- WirelessBluetooth Low Energy 5.4 up to 30 metres. LoRaWAN is in preparation.
Technical data
Values as published by FLEXOO for the standard MultiMoS configuration. Custom prints can differ.
| Sensing points | Up to 26 |
|---|---|
| ADC resolution | 16 bit (65,536 steps) |
| Parameters | Pressure and temperature as standard; humidity, VOC, gas on request |
| Operating temperature | 10 °C to 100 °C, non-condensing |
| Standard shapes | Rectangular, stripe, slider, circle |
| Connectivity | Bluetooth Low Energy 5.4, LoRaWAN coming |
|---|---|
| Transmission rate | Up to 150 fps over Bluetooth |
| Range | Up to 30 m |
| On-board storage | 1 Gbit |
| Battery | 1200 mAh Li-ion, rechargeable, about 50 h continuous measurement |
| Operating temperature | −20 °C to +60 °C |
Need a different shape, more points or another parameter? FLEXOO prints to your specification or develops the sensor with you.
Ask for a custom versionWhere MultiMoS is used
Application areas named by FLEXOO. Each one depends on reading a surface that is hard to reach or never stays still.
Automotive
Seat occupancy, battery cooling leak detection, high-resolution pressure for functional safety.
Energy storage
Cell-level pressure and temperature maps for BMS intelligence and faster R&D.
Medical and wearables
Foot health monitoring and sensor mats for diagnostics.
Logistics
Shelves that detect occupancy and count stock by weight.
Industrial assets
Flange leak detection on pipelines and torque monitoring.
Have a use case that is not on the list? The print can be adapted to new applications.
Describe your use case
Two ways to get one
- Printed to your specificationYou send the technical requirements, FLEXOO prints the sensor.
- Developed with youFLEXOO designs a custom wireless sensor for the application and then produces it.
Tell us what you need to measure.
A surface, a load range, a temperature window, a quantity. That is enough for a first conversation with an application engineer.